C-Data EPON HGU - Device Management; ONU Remote Access Configuration

Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
26
11.2 Restore Default Setting
Login the ONU WEB. Select Management -> Device -> Restore ONU. Click ‘Restore
Default Setting’ button. The device will restore the factory defaults after the application.
Note:Restore Setting on the ONU WEB is take effect to WIFI information of ONU and LAN
port configuration only. It doesn’t take any effect to WAN connection.
11.3 Firmware Upgrade
Login the ONU WEB. Select Management -> Firmware Upgrade -> Firmware Update.
Click ‘select files’ to select firmware file, click ‘upgrade’ button to upgrade the ONU. After the
application, the device is upgraded to the latest software version.
Note: We needn’t extract Realtek project production’s firmware, just upgrade the .tar file. It
will take 4 minutes to upgrade. After upgrading, the ONU will reboot automatically. We needn’t
reboot it by manual.