EasyManuals Logo

C-Data EPON HGU User Manual

Default Icon
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine CommunityXili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
23
2After setting wireless password configuration, click ‘Save/Apply’ button to finish setting.
8.3 WLAN Virtual SSID
1Login ONU WEB, select Internet->WLAN Config->WLAN Config, and then click
‘Virtual SSID’ button to enter Virtual SSID page. We can enable some of virtual SSID, set
band and name them:
2After setting wireless password configuration, click Save/Apply button to finish setting.
Note: we can refer to #8.2 about setting the password of virtual SSID.
9 CATV Configuration
CATV management is mainly applied to ONU with light machine, we need to configure the
ONU optical machine parameters through the ONU’s WEB.
9.1 Configure CATV Port Parameter
Select ManagementCATV conifgCATV config. In this page, we can enable or disable

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the C-Data EPON HGU and is the answer not in the manual?

C-Data EPON HGU Specifications

General IconGeneral
BrandC-Data
ModelEPON HGU
CategoryModem
LanguageEnglish

Related product manuals