100
C Beam
C Beam is used to transfer notes, contacts, calendar events
and other files between C-Pen and PDAs (Personal Digital
Assistant). C Beam supports the standard infrared protocol
IrOBEX and complies with both the vCard and vCalendar
standards.
Please note that the PDA device must support the standard
infrared protocol IrOBEX in order to be used with C-Pen.
If you should experience problems with C Beam, start by
turning off and on both C-Pen and the PDA device.
Receiving files
In order to receive information files from a PDA device with
your C-Pen, follow the steps below.
1. Make sure that the C-Pen’s IR-eye is directed towards the
PDA device’s IR-eye.
Please note that it is very important that the IR-eyes are
aligned and in range of each other (5-20 centimeters, or 2-8
inches). There must be no obstacles between the devices.
2. Send the file from the PDA device according to the in-
structions in the PDA’s user manual.
3. The IR-symbol in C-Pen’s status field indicates activity.
The Receive dialog box appears on the screen, display-
ing the name of the transferred file.
4. You can cancel the transmission at any time by pressing
CANCEL in the Receive dialog box.
!
!
To Next Page
Loading...
