38
• Text Quality
Select Normal or Inverted.
• Calibration
You can either calibrate C-Pen or revert to the default
setting.
Quit Editing
Quit edit mode by selecting Quit Editing.
C Write
C Write is a feature that allows you to draw characters by
using C-Pen as an ordinary pen. C-Pen can track its own
movement over a surface and recognize the movement as a
letter, digit or a symbol. C Write is an alternative to using
the character set when inserting characters in a text.
Please note that to be able to use C Write, the surface
you “write” on must have a distinct pattern. Printed text
is the best choice.
Use C Write in the following way:
1. Enter edit mode.
2. Position the cursor on C-Pen’s display.
3. Place C-Pen with the pen tip flat against a text surface.
4. Form a letter, see C Write Prototypes, p. 42. When using
a C-Pen with a manual trigger, the Trigg button must be
pressed while forming the letter.
5. Lift the pen from the surface. When the pen is lifted from
the surface an image will briefly appear on the display,
showing the letter as perceived by your C-Pen.
!
To Next Page
Loading...
