104
When you read text with C-Pen, it will appear as usual on
C-Pen’s display. To transfer the text to the Windows pro-
gram, direct C-Pen’s IR-eye towards the PC’s IR port. The
text will disappear from C-Pen’s display and be transferred
to the cursor position in the Windows program.
Using cable
To activate C Direct make sure C-Pen is connected to your
PC with the cable. Click the Start button/Programs/C-Pen/
C Direct or click on the C Direct shortcut on your desktop.
The C Direct icon will appear in the system tray in the
lower right corner of your screen. The icon will be partly
yellow when C Direct is connected, otherwise the icon is
greyish.
The display on your C-Pen will show “C Direct”.
When you read text with C-Pen, the text will be transferred
immediately to the cursor position in the Windows pro-
gram. The text will not be visible in C-Pen’s display.
the C Direct icon in the system tray
To Next Page
Loading...
