11
C-Pen correctly. It is crucial that you follow these
instructions in order to get the best results.
• The language of the text
Set the text language of the text you wish to read, to
get the most suitable OCR. See Text Language, p. 90.
• Deformed characters
Anything that is not a printed character, and any
character distorted by a mark or smudge on the paper
may be unrecognizable.
• Overlapping characters
Characters in the text should not overlap.
• Italics and underlined text
Italics are slightly difficult for C-Pen to read in some
fonts. Underlined text is also difficult for C-Pen to
read because the underline changes the shapes of the
descenders of the letters g, j, p, q and y.
• Text colors - text and surface
C-Pen cannot read some combinations of text colors
on colored surfaces, such as red or yellow text on a
white or red background.
Text that is highlighted by a traditional highlighter
marker can be read in some cases, depending on the
color and darkness of the ink.
• Small or large character sizes
The size of the characters should be 5–22 points.
To Next Page
