Page 22 Series 90 Setup Manual
5211038 Cable Assembly
The 5211038 is a 96-conductor, eight-foot, discrete-wired, high-voltage cable assembly. It uses
three, 32-conductor cable assemblies; 5211037 on one end and a 96-pin ZIF connector (plug) on
the second end. The 96-pin ZIF plug is an ITT-600 series connector. This cable is used to
interface to a test fixture.
5211088 Connector Kit
The 5211088 is a 96-pin, panel-mount ZIF receptacle that mates to the 5211038 cable assembly.
This receptacle generally is mounted on a harness board or test fixture and used to wire the
fixture. The connector kit contains a 96-pin receptacle and 100 crimp contacts.
To Next Page
