xGenConnect Installation and Programming Guide 77
To enable this scene trigger:
1. Open UltraSync+ app.
2. Click (i) Site Info button.
3. Click Location Services.
4. Click Edit Map.
5. Zoom and move the map to the desired location.
6. Click Save Map.
7. Click “Set Sunrise-Sunset Location”, this will load the sunrise and sunset
times specific to the selected location into your panel.
8. Click Back.
9. Click Sites.
User Reporting
If a scene performs arm/disarm control of a partition, User 99 will be reported to
the Central Monitoring Station.
To Next Page
Loading...