Need help?Do you have a question about the CADDX xGenConnect and is the answer not in the manual?
Carrier Fire & Security's liability limits for product use and potential damages.
Critical safety information regarding system installation, maintenance, and operation.
Disclaims all warranties, express or implied, including merchantability and fitness.
Document information may change; product is for intended purpose only.
Explains the meaning of WARNING, CAUTION, and NOTE messages in the manual.
Overview of the xGenConnect advanced intrusion panel for security applications.
Table detailing capacity features for different xGenConnect models (zones, users, etc.).
Lists product codes, descriptions, EN grades, and key features of panels/modules.
Details mains input, power supply, operating temperature, and humidity requirements.
Provides dimensions, weight, and enclosure installation guidance.
Step-by-step instructions for installing main panels and various enclosure types.
Procedures for adding new devices (expanders, keypads) to the system.
How to remove devices from the system via keypad or web server interface.
Guides for arming/disarming partitions using keypads and user cards.
Explains keypad lock-out, PIN/card security, and tamper detection mechanisms.
Instructions for activating the SOS panic function via the NXG-1820-EUR keypad.
Detailed guide for programming via PC software for comprehensive system setup.
Accessing and configuring the system via a web browser on LAN or remote.
How to use the smartphone app for remote monitoring and system control.
Navigating the keypad's "Program" menu for system configuration.
Essential security configurations like changing installer codes and user PINs.
Procedures for adding users, cards, and keyfobs for system access control.
Programming zone types, options, and assigning zones to partitions.
Configuring partitions, entry/exit times, and reporting options for segments.
Creating time-based schedules to control system access and automation.
Setting up automatic system arming and disarming based on schedules and users.
Configuring communication paths like IP, Radio, and Remote Access.
Creating event lists and channels for selective message reporting.
Defining actions, groups, and scenes for system automation and event responses.
Explains common system status messages displayed on the interface.
Lists and explains error messages encountered in the app and web server.
Details compatibility information for various NetworX modules with xGenConnect.
Provides a detailed hierarchical map of the system's advanced menu structure.
Definitions of key terms and concepts used throughout the manual.
General| Brand | CADDX |
|---|---|
| Model | xGenConnect |
| Category | Protection Device |
| Language | English |
To Next Page