32 xGenConnect Installation and Programming Guide
Deleting Modules
Devices such as zone expanders, output expanders, and keypads can be
removed from the system by deleting the serial number from the device
database.
To delete a module:
1. On the keypad press Menu, Installer PIN, ENTER, go to Program > Devices.
This menu will be displayed:
1. System Devices
1. Control
2. Keypad
3. Zone Exp
4. Output Exp
5. Power Supply
2. Interlogix Transmitters
1. Transmitter Number
2. Serial Number
3. User
4. Options
5. Scene
4. Tablet Keypads
1. Name
2. Serial Number
3. Partition Group
4. Keypad Options
2. Select the category and type. For example, to remove a keypad, touch
System Devices > Keypad.
3. Touch Device UID (Serial).
4. Touch the serial number displayed.
5. Touch Clear.
6. Touch OK.
The device has now been removed.
Deleting devices can also be done:
• Using the xGenConnect Web Server: click the Advanced Menu, click Devices,
find the device to be removed, delete the serial number, click Save.
• Using DLX900: click Devices > Device Info, select the device, then click
“Remove Device”.
To Next Page
Loading...