OFF
To
turn the wipers
off,
turn the band to
OFF.
Damaged wiper blades may prevent you from seeing well enough
to
drive
safely.
To
avoid damage, be sure
to
clean ice and snow from the wiper
blades before
using
them.
If
they're frozen
to
the windshield, carefully
loosen or thaw them.
If
your
blades
do
become damaged, get new blades
or
blade inserts.
Heavy snow or ice can overload
your
wiper motor. A circuit breaker will stop
the
motor until
it
cools. Clear away
snow
or ice to prevent an overload.
Windshield
Washer
I
A
d
To
wash your
windshield, press
and
hold the paddle labeled
PUSH.
Once
you
feel
you
have enough
washer fluid on the
windshield, release the
paddle. The wipers will
continue to clear the
windshield, then either
stop or return to your
preset speed.
When the washer fluid reaches a low level, LOW WASHER
FLUID
will
be displayed in the Driver Information Center.
Driving without washer
fluid
can
be
dangerous. A bad mud splash can
block your vision and you could hit another vehicle or
go
off
the road.
Check
your washer fluid
level
often.
A
CAUTION:
In
freezing weather, don't
use
your
washer until the windshield
is
warmed. Otherwise the washer
fluid
can
form
ice
on
the
windshield,
blocking your
vision.
2-42
To Next Page
Loading...
