OFF
Turns
off
the day/night function and compass. The mirror will stay in
the day setting.
To
keep the photocells operating well, occasionally clean them with a
cotton swab and
glass
cleaner.
M:
This
turns
on
the day/night portion
of
the mirror
to
automatically
reduce glare.
C/M:
This setting turns
on
thc compass in addition
to
the dayinight
function.
A
letter denoting the direction headed
will
appear in
the
top
right corner
of
the mirror.
Once the compass is calibrated, it does not need
to
be recalibrated.
To
calibrate the compass:
1.
2.
3.
Set
the
switch
on
the
mirror control
to
C/M.
Turn the vehicle ignition switch
ON.
The
letter
C
should
be
displayed
in
the mirror compass window.
If
not,
hold
the
Cal switch (bottom
of
the mirror)
for
more than
10
seconds, and the letter
C
will
appear.
To
hold in the Cal switch, insert
a
paper clip into the small hole
on
the
bottom
of
the mirror
housing.
The
display
will
show a number first,
but
keep holding until the letter
C
appears.
For quick calibration, drive the vehicle
in
a 360-degree circle at
less
than
5
mph
(8
km/h) until the display reads a compass direction. For
normal
calibration, drive the vehicle on your everyday routine, and the
compass will eventually calibrate.
2-58
To Next Page
Loading...
