Then, without shutting
off
the engine, follow these steps:
.*.
Turn
the
cap
counterclockwise
to
unlock
it.
1.
Pull out the dipstick and wipe
it
with
a clean rag
or
paper towel.
2.
Push
it
back
in
all
the way, wait three seconds and then pull
it
back out
again
.
3.
Check both sides
of
the dipstick, and read the lower level. The fluid
4.
If the fluid level
is
in
the acceptable range, push the dipstick back
in
all
level
must
be
in
the cross-hatched area.
the way.
6-2
1
To Next Page
Loading...
