0
Then dry it immediately with a
blow
dryer or a heat lamp.
n
NOTICE:
Be
careful.
A
blow
dryer
may scorch
the
fabric.
0
Wipe with a clean cloth.
Using Solvent-Qpe Cleaner on Fabric
First, see if you have to use solvent-type cleaner at all. Some spots and
stains will clean
off
better with just water and mild soap.
If you need to use a solvent:
Gently scrape excess soil from the trim material with a clean, dull knife
or scraper. Use very little cleaner, light pressure and clean cloths
(preferably cheesecloth). Cleaning should start at the outside
of
the
stain, “feathering” toward the center. Keep changing
to
a clean section
of
the cloth.
0
When
you
clean a stain from fabric, immediately
dry
the area with a
blow dryer to help prevent a cleaning ring. (See the previous
NOTICE.)
Special Cleaning Problems
Greasy
or
Oily
Stains
Such as grease, oil, butter, margarine, shoe polish, coffee with cream,
chewing gum, cosmetic creams, vegetable oils, wax crayon, tar and
asphalt.
0
Carefully scrape
off
excess stain.
0
Follow
the solvent-type instructions described earlier.
Shoe polish, wax crayon, tar and asphalt
will
stain
if
left
on
a vehicle
seat fabric. They should be removed as soon as possible. Be careful,
because the cleaner will dissolve them
and
may cause them to spread.
6-53
To Next Page
Loading...
