4.
Let the belt go back all
the
way.
You
should hear a slight clicking
sound.
If
you don't, the adjustment feature won't set, and you'll have
to start again.
5.
Now you can add a small amount
of
slack. Lean forward slightly, then
sit back.
If
you've added more than
1
inch
(25
mm) of slack, pull the
shoulder belt out as you did before and start again.
If you move around in the vehicle enough, pull out the shoulder belt,
or
open your door, the belt will become tight again.
If
this happens, you can
reset it.
1-17
To Next Page
Loading...
