4.
Run the vehicle's safety belt through or around the restraint. The child
restraint instructions
will
show you how.
5.
Buckle
the
belt. Make sure the rclease button is positioned
so
you
would be able to unbuckle the safety belt quickly if
you
ever had to.
6.
To
tighten the belt, pull its free end
while
you
push down
on
the child
restraint.
I.
Push and pull
the
child restraint
in
different directions
to
be sure
it
is
secure. If the child restraint isn't secure, turn the latch plate over and
buckle
it
again. Then see
if
it
is
secure.
If
it
isn't, secure
the
restraint
in
a
different place
in
the
vehicle and contact the child restraint maker
for their advice about
how
to
attach the child restraint: properly.
To
remove the
child
restraint, just unbuckle
the
vehicle's safety
belt.
It
will
be ready to
work
for
an
adult
or
larger child passenger.
1-44
To Next Page
Loading...
