Cake Makka Range - Page 44

Programming a key card
1. Push and hold the start button (H) in Fig. 25. => The key card symbol is shown.
2. Place the white master key on the key card symbol. => The display shuts down.
3. Push and hold the start button. => The key card symbol and 1 are shown.
4. Place the white master key on the key card symbol. => The key card symbol
and 2 are shown.
5. Place a grey key card on the key card symbol. => The key card symbol and 3
are shown.
6. Place the second grey key card on the key card symbol. => The display
shuts down. The reprogramming is done. The vehicle can be started with
the programmed keys.
Lost key card
When a key card is lost, do the following:
1. Order a new key card from CAKE at ridecake.com/en/service-support/ .
2. Program it, see Programming a key card .
AB
C
D
E
F
H G
Fig. 25
Handlebar controls
45