Calculated Industries Machinist Calc Pro 4087 User Manual

Us e r 's GU i d e — 7
Weight and Volume Function Keys
g6
Tons — Enters or converts a weight or volume
value to tons.
g4
Pounds (lbs) — Enters or converts a weight or
volume value to pounds.
g3
Metric Tons (met tons) — Enters or converts a
weight or volume value to metric tons.
g2
Grams — Enters or converts a weight or volume
value to grams.
g1
Kilograms (kg) — Enters or converts a weight or
volume value to kilograms.
g0
Weight per Volume (wt/vol) — Stores a new
weight per volume as pounds per cubic foot or
other format as shown below. Default value is 490
pounds per cubic foot of steel.
● Pounds per cubic foot
● Pounds per cubic inch
● Metric tons per cubic meter
● Kilograms per cubic meter
Trigonometric Function Keys (NOT AVAILABLE ON MODEL 4086)
g#
Sine — Calculates the Sine of an entered degree or
unitless value.
ga
Arcsine (ArcSine) — Calculates the angle for the
entered or calculated Sine value.
gF
Cosine (Cos) — Calculates the Cosine of an
entered degree or unitless value.
gp
Arccosine (ArcCos) — Calculates the angle for the
entered or calculated Cosine value.
gc
Tangent (Tan) — Calculates the Tangent of an
entered degree or unitless value.
(cont'd)

Calculated Industries Machinist Calc Pro 4087 Specifications

General

Brand	Calculated Industries
Model	Machinist Calc Pro 4087
Category	Calculator
Language	English