Calculated Industries Machinist Calc Pro 4087 - Machinist Function Keys

8 — Ma c h i n i s t ca l c ™/ Ma c h i n i s t ca l c ™ Pr o
gh
Arctangent (ArcTan) — Calculates the angle for the
entered or calculated Tangent value.
Miscellaneous Functions
g.
Degrees:Minutes:Seconds (dms◄►deg) —
Converts between D:M:S and decimal degree
formats; repeated presses will toggle between the
two formats.
%
Percentage — Used to nd a given percent of a
number.
gD
Model 4086
g%
Model 4087
x
2
— Squares the value on the display.
A
Model 4087
only
Backspace Function — Used to delete entries one
keystroke at a time (unlike the
O
function, which
deletes the entire entry).
g %
Model 4086
gA
Model 4087
Square Root ( ) — Calculates the Square Root of
the number on the display.
g,
Reciprocal (1/x) — Finds the Reciprocal of a
number ( e.g.,
8g,=
0.125).
g*
Clear All — Returns all stored values to the default
settings. Does not affect Preference Settings.
g-
Change Sign (+/–) — Toggle displayed value
between negative and positive value.
g+
Pi — Displays value of π (3.1415927).
g=
Paperless Tape (Tape) — Accesses the Paperless
Tape mode (see Paperless Tape section), which
keeps track of your past 30 entries. Useful for
checking strings of numbers.
(cont'd)