EasyManuals Logo

Calculated Industries PROJECTCALC CLASSIC 8503 User Manual

Calculated Industries PROJECTCALC CLASSIC 8503
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Accuracy
The normal display is seven digits; fraction display four
digits. Fraction resolution displays values to the nearest
16th of an inch, unless changed by user. Each calcula-
tion is carried out internally to ten digits.
Auto Shut-Off and Batteries:
Auto Shut-Off: After 8-12 minutes of non-use.
Batteries Included: Two LR-43 batteries.
Battery-Life: 575 hours of actual use.
To replace the batteries, use a small Phillip’s head screw-
driver (or you can also use a screwdriver found in eye-
glass repair kits) and unscrew the
single screw
in the center of the battery door,
located on the back of the cal-
culator (see diagram).
Carefully remove the
battery door, remove the
old batteries from the clips
and replace them with two new
LR-43 batteries. Make sure the positive sides (+) are
facing up. Replace the battery door and re-attach the
screw.
Note: Replacement LR-43 batteries are available at most
discount or electronics stores. Or, call Calculated
Industries at 1-800-854-8075.
ACCURACY, AUTO SHUT-OFF,
BATTERIES AND RESET
POCKET REFERENCE GUIDE - 12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Calculated Industries PROJECTCALC CLASSIC 8503 and is the answer not in the manual?

Calculated Industries PROJECTCALC CLASSIC 8503 Specifications

General IconGeneral
BrandCalculated Industries
ModelPROJECTCALC CLASSIC 8503
CategoryCalculator
LanguageEnglish

Related product manuals