Calculated Industries Tradesman Calc 4400 - Page 12

Pocket RefeRence Guide — 11
G
Angle — Enters or calculates
an Angle, providing the Adjacent
Angle for both instances.
Calculates an Angle given two
other right-triangle values.
ga
X — Enters or calculates the
x value of a ratio. Calculates x
value given a Ratio and y value.
g p
Y — Enters or calculates the
y value of a ratio. Calculates y
value given a Ratio and x value.
gh
X:Y — Enters or calculates a
ratio. Calculates the Ratio
given values for x and y.
A
Arc — Enters Arc Length or
Arc Angle. Calculates Arc
Length, Arc Angle, Chord
Length, Arc Height, Radius and
Arc Area given any two of the
following values: Arc Angle/
Length, Diameter/Radius, Chord
Length and Arc Height. Arc
solutions cannot be solved for
the following cases: Arc Length
and either Chord Length or
Arc Height.
(cont’d)