Calculated Industries Tradesman Calc 4400 - Entering Dimensions and Units; Linear Dimensions Entry; Square and Cubic Dimensions Entry

Pocket RefeRence Guide — 21
r =
TTL= 15. FeeT
+
01 6. FeeT
+
02 + 5. FeeT
+
03 + 4. FeeT
-
02 + 5. FeeT
=
TTL= 15. FeeT
+ 1 0f=
25. FeeT
ENTERING DIMENSIoNS
AND UNITS
Linear Dimensions
The following examples show how linear
dimensions are entered.
Note: The
O
key should be pressed after
each of the entries to clear the display.
dimensiOn KeYsTrOKe
5 Feet
5f
1/2 Inch
1/2i
5 Feet 1-1/2
Inches
5f1i1/2
10 Yards
10y
17.5 meters
17.5n
Square and Cubic Dimensions
For square dimensions, enter the
value and press the unit key twice.
For cubic dimensions, press the unit
key three times.
(cont’d)