Calculated Industries Tradesman Calc 4400 - Key Definitions: Memory and Conversion Keys

Pocket RefeRence Guide — 5
r
Recall — Used with other
keys to recall stored values
and settings.
gr
Store — Used for storing
values.
M
Accumulative Memory
— Adds displayed value to
Accumulative Memory.
gM
M- — Subtracts displayed value
from Accumulative Memory.
Dimensional Function Keys
y
Yards — Enters or converts
to Yards.
f
Feet — Enters or converts
to Feet as whole or decimal
numbers. Also used with
i
and
/
keys for entering
Feet-Inch values (e.g.,
6 f
9i1/2
). Repeated
presses during conversions
toggle between fractional Feet-
Inch and decimal Feet.
i
Inch – Enters or converts to
Inches. Also used with
/
for entering fractional Inch
values (e.g.,
9i1/2
).
Repeated presses during
conversions toggle between
fractional and decimal Inches.
(cont’d)