Calculated Industries ULTRA MEASURE MASTER 8025 - Bending Moment Conversions; N-m to ft-lb Setting Calculation Example

P OCKET R EFERENCE G UIDE — 35
Your Metric-based plan says that the bridge
rail bolt must be tightened to 30 N-m but
your torque wrench only shows ft-lb. Find
the ft-lb setting required to set up the
wrench.
KEYSTROKES DISPLAY
1. Clear calculator:
o o 0.
2. Enter N-m:
3 0 Ç 9 (N-m) N-M 30
3. Find ft/lbs:
Ç 8 (ft-lbs) 22.12687 LB FEET