Calculated Industries ULTRA MEASURE MASTER 8025 - Linear and Area Unit Conversions

P OCKET R EFERENCE G UIDE — 4
k Kilograms Key — Enters
or converts to Kilograms.
G Grams Key — Enters or
converts to Grams.
m Meters Key — Enters or
converts to Meters.
c Centimeter Key — Enters
or converts to Centimeters.
M
Millimeter Key — Enters or
converts to Millimeters.
K
Kilometer Key — Enters or
converts to Kilometers.
I
Miles Key — Enters or
converts to Miles.
y
Yards Key — Enters or
converts to Yards.
f
Feet Key — Enters or con-
verts to Feet as whole or
decimal number. Also used
with the i and / keys
for entering Feet-Inch val-
ues (e.g., 6 f 9 i 1
/2). Repeated presses
during conversions toggle
between Fractional and
Decimal Feet.
i
Inch Key — Enters or con-
verts to Inches. Entry can
be whole or decimal num-
ber. Also used with the /
key for entering fractional