CALIENT S320 - Page 48

CALIENT OCS WebGUI Quick Start Guide
Doc. Part No. 460185-00
July 28, 2015
Rev. 0.2
Page 48 of 63
If the Direction setting for a connection is Bidirectional, the Conn-Half information for
both halves of the connection will appear on the Cross Connections Summary screen
(see below), and the Circuit ID information for both halves of the connection will
appear on the Cross Connection Details screen (see below).
2. Click the appropriate button at the bottom of the Cross Connection Details screen
to perform one of the following actions:
 << Back – returns the user to the Cross Connections Summary screen.
 Refresh – reloads the current screen.