*
!"#$%#&$'()!"#$"#&$'(
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
29
Temperature
dependent control
(optional)
The values of the automatic switching refer to a battery
temperature of 20° C. When using a temperature sensor
at the battery II, these values vary as a function of the
battery temperature.
High temperature => lowering of the threshold values.
Low temperature => higher threshold values.
Application: Parallel operation, buffer operation, general charging
operation
Temperature: Ambient temperature of -25° C to +35° C. During
operation, the housing may heat up to approx. 75° C.
Cooling: By convection
Implementation: According to Association of German Electrotechnical
Engineers regulations and the provisions of the
Instrument Safety Act.
Design according
to:
EN 60 335-1 / EN 55014-1 / EN 55014-2 / EN 61 000-3-2/3
Test labelling:
Use
EVS 30/20-DS/IU:
For charging batteries with a rated voltage 12 V and a
capacity of 70-200 Ah and for 12 V current distribution.
Use
EVS 30/30-DS/IU:
For charging batteries with a rated voltage 12 V and a
capacity of 100-300 Ah and for 12 V current distribution.
Housing: Aluminium, bright/painted red, ventilated
Length:
Width:
Height:
302 mm (without legs)
173 mm (without legs)
100 mm
Weight: 3 kg (30 N)
To Next Page
Loading...
