Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.. Page 7 of page 38
CALIX 2364 ONT INSTALLATION GUIDE
2 - 2364 ONT P
RODUCT
O
VERVIEW
2.5 Power Options
The 2364 ONT supports the following options for power:
• +12VDC - input power between +10VDC to 14.5VDC. This option uses the standard 7-pin connector common on residential
ONTs and interfaces to a wide-range of UPS' facilitating power, battery backup and alarming.
• AUX PWR - input power between +20VDC to +57VDC. This option uses the 2-pin auxiliary connector with 16AWG copper
wire.
2.6 Product Specifications
Refer to the Calix website (www.calix.com) for product specifications.
Hold for 6.1-9.9 seconds No action occurs.
Hold for 10+ seconds The ONT restores factory defaults and reboots upon release of the reset button. The ONT
also reboots and restores its configuration to factory defaults when you enter the CLI com-
mand restore-defaults from Privileged Mode.
To Next Page
Loading...
Need help?
General