Calix 2364 ONT - 3 2364 ONT Installation Steps; 3.1 Preparing for Installation; 3.4 Installing the UPS; 3.5 Mounting the 2364 ONT

Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.. Page 8 of page 38
CALIX 2364 ONT INSTALLATION GUIDE
3 - 2364 ONT I NSTALLATION S TEPS
3 2364 ONT Installation Steps
In this section:
- 3.1 Preparing for Installation
- 3.4 Installing the UPS
- 3.5 Mounting the 2364 ONT
- 3.6 Running Fiber to the 2364 ONT
- 3.7 Grounding the 2364 ONT
- 3.8 Connecting the Power
- 3.9 Connecting the Fiber Optic Cabling
- 3.10 Connecting Telephone Service (POTS) Wires
- 3.11 Connecting the Ethernet Cables
- 3.12 Connecting the DS1 Cables
- 3.13 Completing Your Installation
- 3.13 Completing Your Installation
3.1 Preparing for Installation
This section contains the following subsections:
- 3.1.1 ONT and UPS Site Guidelines
- 3.3.2 Weatherproofing the 2364 ONT
- 3.3.3 Unpacking the 2364 ONT and the Outer Enclosure
Warning: This equipment must be serviced by authorized service personnel only. All repair procedures
are designed to allow sub-assembly level repairs ONLY. Authorized service personnel should not
attempt component level repairs or circuit modifications to the printed circuit board. Improper repairs
can create a safety hazard