Page 28
6.0 WARRANTY CONDITIONS
The following exclusions apply to the Warranty given by Calorex Heat Pumps Ltd. No claims will be accepted if :-
1.The heat pump is incorrectly sized for the application.
2.The heat pump is installed in any way that is not in accordance with the current procedures as defined by
Calorex Heat Pumps Ltd.
3.The heat pump has been worked upon or is adjusted by anyone other than a person authorised to do so by
Calorex Heat Pumps Ltd.
4.The air flow to and from the machine is outside the specified limits.
5.The water flow through the machine is outside the specified limits.
6.The heat pump has suffered frost damage.
7. The water pH level and/or chemical balance is outside the following limits:
8.The electrical supply is insufficient or in any way incorrect.
9.The fan amps and duct pressure are outside the specified limits.
10. The heat pump must be maintained to the service requirements in section 2.6.
IF IN ANY DOUBT PLEASE ASK
Note:- The Reply Paid Warranty Registration Card must be returned, to ensure that the correct warranty is given. If
you do not find a Registration Card with your Heat Pump please contact the Calorex Service Department giving
your name, address, model & serial number of your heat pump. A card will be sent to you for completion.
Acidity pH pH 7.2 - 7.8
Total Alkalinity, as CaCO
3
ppm 80 - 120
Total Hardness, as CaCO
3
ppm 150 - 250
Total Dissolved Solids ppm 1000
Maximum Salt Content ppm 8000
Free Chlorine Range ppm 1 - 2 Domestic
Free Chlorine Range ppm 3 - 6 Commercial
Superchlorination max 30ppm for 24 hrs
Bromine ppm 2 - 5
Baquacil ppm 25 - 50
Ozone ppm 0.9 Max
Maximum Copper Content ppm 1
Aquamatic Ionic Purifier ppm 2 Max
To Next Page
Loading...
