About This User Guide 12
About This User Guide
This guide describes planning and installation of the Cambium point-to-point and point-to-multipoint
wireless Ethernet bridges. It covers PMP/PTP 450, 450i, 450b, 450d and PMP 450m platform Series. It is
intended for use by the system designer, system installer and system administrator.
For radio network design, planning, and installation refer to the following chapters:
l Chapter 1: Product description
l Chapter 2: System hardware
l Chapter 3: System planning
l Chapter 4: Preparing for installation
l Chapter 5: Installation
Contacting Cambium Networks
Support website: https://support.cambiumnetworks.com
Main website: http://www.cambiumnetworks.com
Sales enquiries: solutions@cambiumnetworks.com
Support enquiries: https://support.cambiumnetworks.com
Repair enquiries: https://support.cambiumnetworks.com
Telephone number list: http://www.cambiumnetworks.com/contact
Address: Cambium Networks Limited,
Linhay Business Park,
Eastern Road,
Ashburton,
Devon, TQ13 7UP
United Kingdom
Purpose
Cambium Networks Point-to- Multi-Point (PMP)/Point-To- Point (PTP) 450 documents are intended to
instruct and assist personnel in the operation, installation and maintenance of the Cambium PMP/PTP
equipment and ancillary devices of 450 Platform Family. It is recommended that all personnel engaged in
such activities be properly trained.
Cambium disclaims all liability whatsoever, implied or express, for any risk of damage, loss or reduction in
system performance arising directly or indirectly out of the failure of the customer, or anyone acting on
the customer's behalf, to abide by the instructions, system parameters, or recommendations made in this
document.
Product notation conventions in document
This document covers Cambium 450 Series, 450i Series and 450m Series products. The following notation
conventions are followed while referring to product series and product family:
To Next Page
Loading...
Need help?
General
