Battery information
CAUTION !
If your Cambox automatically turns off few seconds after being turned on, this is
caused either by a too low battery level, a full memory card (not enough free space
to record datas on the card) or a missing card.
12
It takes about 2 hours to fully charge the battery via a 230V USB
power outlet.
The charging time might be longer if you plug the Cambox to
another source (car USB charger, computer, etc…)
The Cambox emits 3 vibrations in order to indicate that the
battery level is too low and the extinction is imminent !
You can verify the battery level by opening the smartphone
application (see P. 15)
IMPORTANT !
Il those conditions are not met, the autonomy and the performance of the battery
can be impacted.!
In order to guarantee that the battery works correctly, make sure to fully charge it at
least once every 3 months.
Use a power adapter or USB port on a PC to recharge the battery. Regarding
the adapter, he must meet these conditions* :
1. Input (to the main outlet)
•
100 - 240 V
•
50/60 Hz
•
0.32A (320 mA) - 0,50A (500mA)
2. Output (to the charging cable)
•
5 V Max
•
1 A (1000 mA) Max
•
5 W Max
*This data is visible on all adapters, regardless of brand (see photo above )
To Next Page
Loading...
