Need help?Do you have a question about the CAMBRIDGE CXU and is the answer not in the manual?
General| HDMI | Yes |
|---|---|
| Depth | 312 mm |
| Width | 430 mm |
| Height | 82 mm |
| Weight | 5000 g |
| Device type | Blu-Ray player |
| Built-in HDD | No |
| HDMI version | 1.4a |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, Dolby TrueHD |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Disc types supported | BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-ROM, DVD-RW |
| Playback disc formats | Blu-Ray video, CD audio, DVD-Audio, DVD-Video, SACD |
| Supported video modes | - |
| USB 2.0 ports quantity | 3 |
| Ethernet LAN data rates | 100 Mbit/s |
| Digital audio optical out | 0 |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 35 W |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio output channels | 7.1 channels |
Unit requires adequate space for airflow. Do not stack units or block vents.
Avoid direct sunlight, heat sources, dust, cold, moisture, vibration. Place on sturdy surface.
Operate from specified power source. Unit draws <0.5W in standby.
Declaration of conformity with FCC rules for electromagnetic compatibility.
Equipment tested to comply with Class B digital device limits.
Compliance with Canadian standards for digital apparatus and license-exempt RSS.
Proof of purchase is required for warranty service.
Primary HDMI output, benefits from Darbee processor. 3D TV compatible. Supports ARC.
Use HDMI 1 for video, HDMI 2 for audio if receiver is not 3D compatible.
Steps to power on, open tray, insert disc, and start playback.
Accesses settings for playback features based on content type.
Change video output resolution to match TV.
Fine-tune picture quality for optimal visual result.
Configure audio processing for analogue outputs.
Set up speaker size, distance, and trim for surround sound.
Configure playback preferences for various content types.
Set ratings to prevent minors from watching inappropriate content.
Set speaker delay for audio propagation time compensation.
Upgrade player firmware via USB or network.
Reset all settings to factory default values.
Select Ethernet, Wireless, or Off for internet connection.
Configure wireless network connection using Scan, Manual, or WPS.
Connect USB drives to ports for music, movies, photos.
Configure playback preferences for various content types.
Configure video output options.
Configure audio output formats.
Configure audio processing for analogue outputs.
Configure hardware and control options.
Configure internet connection and BD-Live access.
Fine-tune picture control parameters for optimal visual result.
Configure output mode for both HDMI ports.
Select video output mode for 3D content.
Use HDMI 1 for video, HDMI 2 for audio.
Output 3D if supported by disc and display.
Mix secondary audio/menu sound with primary audio.
Select audio output format for HDMI output.
Set maximum LPCM output frequency for digital outputs.
Recommended audio format settings for direct TV connection.
Recommended settings for receivers supporting HDMI v1.3.
Recommended settings for receivers with analogue inputs.
Recommended settings for receivers with digital inputs only.
Configure speaker arrangement and settings for optimal analogue audio.
Convert multi-channel audio to stereo or 5.1/7.1 output.
Configure speaker size, distance, and trim for optimal analogue output.
Set speaker delay for audio propagation time compensation.
Set crossover frequency for speakers when size is set to 'Small'.
Add slight delay to audio for synchronization with video.
Upgrade player firmware via USB or network.
Enable/disable HDMI CEC for consumer electronics control.
Reset all settings to factory default values.
Enable/disable client for receiving streaming media from home network.
Select Ethernet, Wireless, or Off for internet connection.
Configure wireless network connection using Scan, Manual, or WPS.
Checks for power connection issues.
Checks for disc loading, condition, and type compatibility.
Checks amplifier, interconnects, and audio output settings.
Checks video cable, TV input, format support, and Pure Audio mode.
Checks USB device compatibility, file types, and power requirements.
Checks HDCP support and screen resolution compatibility.
Features Wolfson DACs, ATF upsampling, Pure Audio mode.
Uses DARBEE Visual Presence, 4k upsampling, 2D-3D scaling.
Supports multiple sources via HDMI, digital inputs, and USB.
To Next Page
