ThunderSync3-16 Page 18 of 41
To install the firmware onto the hub click the hub(s) connected that you want to update, the latest
firmware will be automatically selected, if you wish to change the firmware version you are updating
to then this can also be done. Once selected press the update button at the top and the update will
commence.
CAUTION
Your ThunderSync3-16 may not function correctly
Do not downgrade firmware onto a new product
CAUTION
Your Cambrionix Firmware may get corrupted
Do not interrupt the Firmware update process.
Do not disconnect the power during the update process.
To Next Page
Loading...
Need help?
General