ThunderSync3-16 Page 8 of 41
4. Getting Started
This manual provides a reference for end-users installing for the first time and using their hub
afterwards. As well as a guide for product safety-related information.
The ThunderSync3-16 is intended to be used in an indoor static environment in which the
environment falls within the tested specifications to provide charge, sync and management
functionality. Please see the physical specifications section of this manual for information on the
environment specifications.
4.1. Unpacking your product
When you have received your product, please check the packing slip inside the box to ensure all
contents and quantities are correct before opening. This is to avoid retesting and repackaging any
items that are not required.
When opening the packaging, use a suitable method to open the box i.e, do not use a knife. This is to
ensure the product is not damaged.
CAUTION
Personal Injury and Damage to the product
There will be a label on the hub advising you to read the User manual before
use. This will need to be removed before use as it may be covering host ports,
vents etc.
4.2. What's Included
l
Thunderbolt™ 3 Cable (to provide communication between the host system and hub)
l
ThunderSync3-16 Hub
l
2m Mains power cable (Country specified on order including fuse for the UKplugs)
Part description Part number
Thunderbolt™ 3 updater cable 200369
UK Power cable 200144
US Power cable
200327
EU Power cable 200329
AUSPower cable 200337
IND Power cable 200341
To Next Page
Loading...
Need help?
General