ThunderSync3-16 Page 17 of 41
5.4.3 Charging Profiles
To ensure attached devices charge at their optimum rate, our smart USB hubs come with the below
intelligent charging profiles built in:
0 Intelligent charging algorithm which will select a profile 1-6
1 2.1A (Apple)
2 BC1.2 Standard (this covers the majority of Android™ phones and other devices)
3 Samsung
4 2.1A (Profile 1 but with a longer timeout)
5 1.0A (Typically used by Apple)
6 2.4A (Typically used by Apple)
5.4.4 Firmware
The firmware can be kept up to date using our LiveViewer software. As part of delivering an easy user
experience, our LiveViewer application is now a set-and-forget solution. The LiveViewer application
will discover your USB hub’s firmware and present an update for you.
To update the firmware, first, go to the firmware section of LiveViewer. Here you can see the available
Firmware versions to install to the hub.
The current firmware version on the hub is displayed in the firmware section alongside the hub's
name. This will appear red if a newer version is available or green if it is the most up to date.
To Next Page
Loading...
Need help?
General