What to do if my CAME A3000A won't open or close?
If your CAME Gate Opener is not opening or closing, here are a few things to check: * **Power:** Ensure that the power supply is working. * **Gearmotor:** Make sure the gearmotor is locked (refer to Chapt. 5.6 for instructions). * **Transmitter Batteries:** Replace the batteries in the transmitter, as they might be run down.
Why does my CAME A3000A Gate Opener open but not close?
If your CAME Gate Opener opens but then refuses to close, the issue might be with the photocells. Check that the photocells are clean and in good working order.
General| Motor Power | 200 W |
|---|---|
| Max Gate Weight | 800 kg |
| Operating Temperature | -20°C to +55°C |
| Protection Level | IP54 |
| Protection Rating | IP54 |
| Encoder | Yes |
| Maximum Leaf Weight | 800 kg |
| Power Supply | 230 V AC (50/60 Hz) |
| Safety Features | Obstacle detection |
| Control Options | Remote control, key switch |
To Next Page
