What to do if my CAME Gate Opener won't open or close?
If your CAME Gate Opener is not opening or closing, here are a few things to check: * **Power:** Ensure that the power supply is working. * **Gearmotor:** Make sure the gearmotor is locked (refer to Chapt. 5.6 for instructions). * **Transmitter Batteries:** Replace the batteries in the transmitter, as they might be run down.
Why does my CAME A5000A Gate Opener open but not close?
If your CAME Gate Opener opens but then refuses to close, the issue might be with the photocells. Check that the photocells are clean and in good working order.
General| Model | A5000A |
|---|---|
| Category | Gate Opener |
| Power Supply | 230 V AC |
| Motor Voltage | 230 V AC |
| Power Consumption | 200 W |
| Max Gate Weight | 500 kg |
| Max Gate Length | 5 m |
| Duty Cycle | 30% |
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP44 |
| Encoder | Yes |
| Safety Features | Obstacle detection |
| Opening Speed | 12 m/min |
| Closing Speed | 12 m/min |
Guidelines for disposing of packaging materials for recycling.
Proper disposal of product components, separating recyclable and hazardous materials.
Visual guide highlighting key safety hazards associated with the product in operation.
Explains symbols used in the manual for reading, safety, and user information.
Identifies and labels the main components of the gate automation system.
Specifies gate leaf length and weight limits for different product models.
Outlines preparatory steps for installation, including junction boxes and tubing.
Wiring diagram for connecting two gate motors to specific control panels.
Wiring diagram for connecting a single gate motor to specific control panels.
To Next Page
