CAME GARD series - Code Storage

- pag. - pag.
- pag. - pag.
- pag.
1414
1414
14
- english - - english -
- english - - english -
- english -
- While holding down key "CH" signal LED flashing (Fig.1), press the control key on the transmitter: the lights up of
LED sign the code stored (Fig.2).
IMPORTANT: Do not store the code on the circuit card unless the barrier is closed.
N.B.: If you wish to change the code on your transmitters in the future, simply repeat the procedure described
above.
CODE STORAGE
C
Fig. 1
2
1 345678910
4
Fig. 2
2
1 345678910
4
Flashing LED
Lit LED
AF radiofrequency board
CH
CH