Need help?Do you have a question about the CAME GGT40AGS and is the answer not in the manual?
General| Brand | CAME |
|---|---|
| Model | GGT40AGS |
| Category | Control Systems |
| Language | English |
Key safety guidelines for installers.
Refers to user precautions to be read.
Details the different barrier models and features.
Provides electrical and mechanical specifications for models.
Steps before physical installation, like site prep.
Detailed steps for foundation and plate installation.
Securing the main barrier unit to the foundation.
Steps to open the barrier for access.
Procedure to alter the boom's default direction.
Steps for attaching the boom arm to the mechanism.
Guide to select spring anchor points based on boom width.
Step-by-step guide for spring assembly.
Adjusting the spring for proper boom stability.
Setting the open and closed positions.
Fine-tuning the horizontal boom alignment.
Fine-tuning the vertical boom alignment.
Guidelines for routing cables safely.
Instructions for connecting the main power.
Details on wiring the power supply.
Explains the control panel buttons.
Initial steps for commissioning and setup.
Overview of programmable functions and their codes.
Assigning functions to CX, CY, and CZ inputs.
Procedure to verify safety device functionality.
Setting the delay for automatic closing.
Adjusting obstacle detection sensitivity.
Saving configuration and user data.
Loading configuration and user data.
Configuring maintenance alerts based on cycles.
Configuring behavior during power outages.
Registering users and assigning functions.
Verifying correct motor rotation direction.
Initiating the boom's automatic travel learning.
Wiring for connecting two operators in pair mode.
Configuration steps for paired operation.
Wiring for connecting two operators in alternate mode.
Configuration steps for alternate operation.
To Next Page
