Need help?Do you have a question about the CAME GARD PT Brushless and is the answer not in the manual?
General| Brand | CAME |
|---|---|
| Model | GARD PT Brushless |
| Category | Control Systems |
| Language | English |
Key safety advice for installers. Follow all instructions to prevent serious bodily harm.
Safety advice intended for end-users of the product.
Identifies key hazards for users, such as hand entrapment.
Guidelines for environmentally friendly packaging disposal and recycling.
Instructions for proper product disposal and recycling of components.
Explanation of symbols and markings used throughout the manual.
Overview of the GPT40AGS automatic barrier, including its features.
Specifies the product's intended applications and limitations.
Identifies and labels the main physical components of the barrier.
Detailed diagram and listing of control board terminals and connectors.
Diagram showing the physical dimensions of the barrier unit.
Specifies maximum passage width and duty cycle limitations.
Details electrical and operational specifications of the barrier.
Lists the fuses used in the barrier system and their ratings.
Recommended cable types and minimum thicknesses for electrical connections.
Details resistance classes for different boom lengths against wind.
Steps before laying the anchoring plate, like digging and tube setup.
Detailed steps for setting up and securing the foundation anchoring plate.
Steps for preparing the barrier unit before final mounting.
Procedure for securely attaching the barrier to its foundation.
Instructions for configuring the direction of boom movement (left/right).
Steps for attaching the boom to the barrier mechanism.
Detailed steps for cutting and fitting boom slot covers and impact profiles.
Configuration of boom based on passage width and accessories.
Setting mechanical limit switches for boom travel endpoints.
Procedure to adjust the boom's horizontal alignment.
Procedure to adjust the boom's vertical alignment.
Guidelines for routing cables safely and avoiding heat/damage.
Procedure for connecting the barrier to the main power supply.
Details on the 24V AC/DC output for powering accessories.
Description and connection of indicator lights and warning lights.
Wiring and connection of various control inputs like readers and buttons.
Connecting safety devices like photocells and their configuration.
How to navigate and use the programming buttons (ESC, <, >, ENTER).
Configuration of the temporary stop feature for the barrier.
Assigning specific functions to the CX input.
Assigning specific functions to the CY input.
Assigning specific functions to the CZ input.
Enabling and checking safety device functionality.
Configuring the maintained action behavior for barrier operation.
Setting obstacle detection when the motor is stopped.
Configuring the warning light behavior and status indication.
Setting the type of control device (Transponder/Keypad).
Setting activation modes for the electric lock.
Setting the type of light output (flashing/cycle).
Setting the delay time for automatic closing after opening.
Configuring the early activation time before maneuvers.
Adjusting the barrier's opening speed percentage.
Adjusting the barrier's closing speed percentage.
Adjusting obstruction detection sensitivity during boom travel.
Configuring functions for the RSE1 connector.
Saving user data and configurations to memory.
Uploading user data and configurations from memory.
Sharing parameters between Master and Slave barriers.
Setting the direction of the boom opening.
Assigning a unique identification code for CRP connections.
Setting communication speed for the RSE1 port.
Configuring how FCA/FCC outputs report boom status.
Enabling a counter for authorized vehicle passages.
Activating detection for boom drop-away.
Registering and assigning functions to up to 250 users.
Deleting registered users from the system.
Deleting all registered users from the system.
Choosing the type of radio coding for transmitters.
Setting the length of the boom for system configuration.
Verifying the correct boom opening direction.
Initiating the boom's travel self-learning process.
Resetting programming parameters to default values.
Viewing the number of maneuvers performed by the operator.
Displaying the current firmware version of the device.
Procedure for updating firmware using a USB stick.
Initial steps for commissioning and setting up the system.
Saving and loading configurations via USB or memory roll.
Illustrations showing final assembly and connection steps.
Connecting two operators for synchronized operation.
Setting up Master/Slave configuration for combined operation.
Saving user data for combined systems.
Describes operating modes for combined barriers.
Connecting two operators for sequential operation.
Setting up the alternate operation mode.
Saving user data for alternate systems.
Describes operating modes for alternate barriers.
Mean Cycles Between Failures for different boom configurations.
Recommended maintenance tasks and frequencies for the barrier.
List of error codes and their corresponding meanings.
Explanation of NC/NO contact status codes for diagnostics.
To Next Page
