CAME GARD PT Brushless - Error Messages and Troubleshooting; Error Codes; Contact Status Codes

p. 29 - Manual FA01332-EN - 04/2019 - © CAME S.p.A. - The contents of this manual may change, at any time, and without notice. - Original instructions
ERROR MESSAGES
E2
Adjustment error
E3
Encoder failure error
E4
Services test failure error
E7
Operating time error
E8
Open release-hatch error
E9
Obstacle detected during closing
E10
Obstacle detected during opening
E11
Exceeded the maximum number of obstacles consecutively detected
E14
Serial communication error
E15
Incompatible transmitter error
E16
Open SLAVE-motor hatch error
E20
Arm/boom drop-down error on ARM connector
E22
USB device error
E23
Arm/boom drop-down error on MOTOR BLOCK connector
C0
Contact 1-2 (NC) is open.
C1
The (NC) contacts are open.
C4
The (NC) contacts are open.
C5
The (NC) contacts are open.
C7
The (NC) contacts are open.
r7
The (NC) contacts are open.
C9
The (NC) contacts are open.
C10
The (NO) contact is closed.