Pag.
18 - Manual code:
319T98EN ver.
2.0 11/2012 © CAME cancelli automatici s.p.a. - The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
7.8 User changes (user fucntion)
1
From the Radio/Users menu, select
User Changes, press ENTER to confirme.
2
Select the user which requires a change in function (a) by using the <> or
(b), by pressing the relative transmitter button, and (c) pulling the card through
the sensor. Press ENTER to confirm.
3
select the function requried for the user. Press ENTER to confirm.
P.N. pressing ENTER to confirm takes you back to the User Changes window.
7.9 Error message
“STOP Contact Open”: Check proper connection or effi ciency of the device
“Service Check!!!” Malfunctions are present in the safety devices.
“Encoder Out of Order: check the proper connection or effi ciency of the device.
“CX-CY Contact Open”: check the proper connection or effi ciency of the device.
Change users
<>
Change user
n.1 exist
<>
Ass. function
User function
<>
Ass. function
Part. opening
<>
ACCESS CONTROL
To Next Page
Loading...
Need help?
General
