Page 30 - Manual FA01742-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Encoder operation
Obstruction detection when OPENING.
The door closes again.
Obstruction detection when CLOSING.
The door inverts its travel direction and reopens.
After three consecutive inversions, when closing, the door stays open and automatic closing is excluded. After
three consecutive opening or closing detections, the door stops.
To close the door again, press a control button or use the transmitter.
ERROR MESSAGE
The error messages appear on the display.
E 2 Calibrating the complete gate-travel
E 3 Encoder broken
E 4 Services test error
E 7 Operating time error
E 9 Closing obstruction
E10 Opening obstruction
E11 Maximum number of obstructions consecutively detected
DISPLAY SYMBOLS KEY
L
Normal operation
p. 30 -
Manual
FA01742-EN - 12/2021 - © CAME S.p.A. -
The contents of this manual may be changed, at any time, and without notice. - Original instructions
To Next Page
Loading...
Need help?
General
