Page 27 - Manual FA01742-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
U1
Entering users
Up to a maximum of 250 users can be entered and each can be associated to a
function of choice among those available. This must be done via transmitter (see
"ENTERING USERS WITH ASSOCIATED COMMAND paragraph).
1 = open-close (step-step) / 2 = open -stop-close-stop (sequential) /
3 = open only / 4 = partial opening
U2
Deleting users Deleting single users (see paragraph called DELETING SINGLE USERS).
U3
Deleting users
Deleting all users.
OFF = Deactivated / ON = Delete all users.
A3
Travel calibration Boom travel calibration (see TRAVEL CALIBRATION paragraph).
A4
Resetting
parameters
Caution! To restore the factory settings.
OFF = Deactivated / ON = Activated
A5
Maneuver count
For viewing the number of maneuvers made by the gearmotor ( 1 = 100 maneuvers;
010 = 1000 maneuvers; 100 = 10000 maneuvers; 999 = 99900 maneuvers; CSI
= maintenance job)
H1
Version View the fi rmware version.
p. 27 -
Manual
FA01742-EN - 12/2021 - © CAME S.p.A. -
The contents of this manual may be changed, at any time, and without notice. - Original instructions
To Next Page
Loading...
