Campbell Hausfeld IronForce IFN2190 User Manual

16
Use only a pressure-regulated
compressed air source to limit the
air pressure supplied to the tool.
The regulated pressure must not
exceed 120 psi.
Disconnect air supply and release
tension from the pusher before
attempting to clear jams because
fasteners can be ejected from the
front of the tool. Personal injury
may occur.
If the regulator fails, the pressure delivered to the tool must not
exceed 200 psi. The tool could explode which will cause death or
serious personal injury.
Figure
5 - Nailer disconnected from air source

Campbell Hausfeld IronForce IFN2190 Specifications

General

Brand	Campbell Hausfeld
Model	IronForce IFN2190
Category	Nail Gun
Language	English