Air Source
Use only clean, dry, regulated compressed air at the rated pressure or
within the rated pressure range as marked on the tool. Always verify
prior to using the tool that the air source has been adjusted to the
rated air pressure or within the rated air-pressure range.
Never use oxygen, carbon dioxide, combustible gases or any
bottled gas as an air source for the tool. Such gases are capable of
explosion and serious injury to persons.
Never connect to an air source that is capable of exceeding 200 psi.
Over pressurizing the tool is able to result in bursting, abnormal
operation, breakage of the tool or serious injury to persons.
To Next Page
Loading...
Need help?
General
