Tool Use and Care
a. Use clamps or another practical way to secure and support the work
piece to a stable platform. Holding the work by hand or against the
body is unstable and is able to lead to loss of control.
b. Do not force the tool. Use the correct tool for the application. The
correct tool will do the job better and safer at the rate for which the
tool is designed.
c. Do not use the tool if the switch does not turn the tool on or off. Any
tool that cannot be controlled with the switch is dangerous and must
be repaired.
d. Disconnect the tool from the air source before making any
adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce the risk of starting the tool
unintentionally.
To Next Page
Loading...
Need help?
General
