Campbell AVW200 series - Options Tab of the Troubleshoot Tool

AVW200-series 2-Channel Vibrating Wire Spectrum Analyzer Modules
FIGURE 5.5-2. Options Tab of the Troubleshoot Tool
4. Select the AVW200 channel either 1 or 2 and the multiplexer channel that
the sensor is attached. If not using a multiplexer, then set the multiplexer
channel to one.
5. Once the appropriate settings have been specified, click OK on the Options
window and click the Poll tab at the bottom of the Troubleshoot window.
The results of the Poll will be displayed on a Spectrum graph and a Time
Series graph (see Figure 5.5-3).
34