Campbell AVW200 series - Page 92

Appendix G. CR10X Programming Example
G-2
10: Z=X (P31) ;Write Decay Ratio to inlocs 65-80
1: 95 X Loc [ DcayRatio ]
2: 65 -- Z Loc [ Decay_1 ]
11: Z=X (P31) ;Write Thermister resistance to inlocs 81-96
1: 96 X Loc [ Thrmister ]
2: 81 -- Z Loc [ Therm_1 ]
12: Z=X*F (P37)
1: 76 -- X Loc [ Therm_1 ]
2: .001 F
3: 76 -- Z Loc [ Therm_1 ]
13: End (P95)
14: Do (P86)
1: 52 Set Port 2 Low
15: Do (P86)
1: 10 Set Output Flag High (Flag 0)
16: Real Time (P77)^25459
1: 1220 Year,Day,Hour/Minute (midnight = 2400)
17: Sample (P70)^326
1: 96 Reps
2: 1 Loc [ Freq_1 ]
*Table 2 Program
02: 0.0000 Execution Interval (seconds)
*Table 3 Subroutines
End Program